Technical analysis of anchor bolt installation for industrial equipment _ Selection of anchor bolt
Anchor bolts in general are used with the equipment must meet the design requirements and installation requirements of the equipment.
1. The selection of anchor bolts should generally be based on the relevant specifications, and the diameter of the anchor bolts should not be larger than the bolt holes of the anchor bolts of mechanical equipment.
2. Anchor bolts are generally equipped with corresponding flat washers, spring washers and nuts, and some mechanical movements generated by large equipment should be appropriately selected to add nuts and self-locking nuts.
3. The length of the anchor bolt must be selected in strict accordance with the requirements of the construction drawings.
4. The following preparations are required before installing anchor bolts: When the anchor bolt is carried out, there are generally corresponding process flow charts, construction drawings and equipment drawings. When installing the anchor bolt, we must strictly abide by the requirements of the drawings, master the technical points of installing the anchor bolt, and make technical preparations for the installation of the anchor bolt. When installing the anchor bolt, we must be equipped with the corresponding washers and nuts. Keep the screws and nuts of anchor bolts when they are placed to protect the nuts and screws.
Next
Related Posts
Use and working principle of anchor bolts
We provide fasteners solutions
Leave Your Message