Technical analysis of anchor bolt installation for industrial equipment _ Installation process of anchor bolt
install the installation frame of the anchor bolt
The anchor bolt mounting rack of each device has its own model, specification, size and number. After the installation rack is transported to the installation site by a transport vehicle, the installation rack of the anchor bolt is hoisted to the specified position by using the lifting equipment, and then adjusted to the center position by using a crowbar.
the top elevation control of the bolt mounting frame
The top elevation of the bolt mounting frame will have a certain deviation in the design, and cannot exceed the range of deviation during installation. The actual elevation of each mounting frame needs to be measured by horizontal instruments at four corners. If the measured value is high or low, appropriate adjustment is required. Only when the top elevation of the mounting frame meets the technical requirements can the lower part of the steel frame and the foundation platform be welded and fixed. ,
anchor bolt installation
When installing anchor bolts in bolt holes, install a positioning plate at each bolt, and secure the anchor bolts to the specified position using a nut bar.
Control the elevation of the top surface of the anchor bolt
1. When installing the top surface of the anchor bolt, a certain deviation is also allowed, and the deviation road section should be taken scientific maintenance work in a timely manner. Those places where the drainage is not smooth and the roadbed is low should take the method of digging the side ditch in time, and before the construction of the roadbed, you can choose to build the filling material with strong permeability. For the road section with low roadbed, the height of the roadbed can be increased, such as the use of gravel and sand and other paving materials to increase the roadbed. It can help the maintenance of roadbed in counties and townships in mountainous areas, and then promote it to be more safe and stable, so that the maintenance of roadbed can run normally.
Related Posts
Use and working principle of anchor bolts
We provide fasteners solutions
Leave Your Message